How to enable dvd on a samsung smart tv tv so that you can watch dvd disks ???

Help such a problem! How to enable dvd on a samsung smart tv tv so that you can watch dvd disks ???

               Samsung smart TV

You will need

- connecting wires

- adapters RCA-RCA, SCART-SCART, SCART-RCA, S-video

Instruction manual

1.RSA connector and wire

To begin with, look what else lies in the box. Even with the simplest DVD player, the kit comes with a cable for connecting it to a TV. Most often this is an RCA wire - common bells, pins on both ends of three different colors: yellow for video, white and red for audio (this is an international standard). Look at the DVD from the back where the connectors are located. Find the connectors with the same colors as the wire pins, yellow will be labeled video, and white and red - audio - L - R. Look for the same connectors on the TV, they can be on the front panel, side or back. Connect them by color wire, turn on the corresponding video channel on the TV and enjoy.

2.SCART connector and wire

It may be that the SCART wire will be included in the kit - a wide connector with two rows of contacts inside. This wire collects less interference when transmitting video and audio. It is the easiest to connect, since additional wires, except for itself, are not required. Find the appropriate connectors on the DVD and TV. That's right, there is one such connector on the player, and two on the TV - one is more suitable for the incoming signal, the other for the outgoing. Look at the inscriptions and symbols of the connectors: the circle with the arrow inward is for the incoming, if the arrow in the direction of the circle is for the outgoing.

3.S-video and component input

The most exotic connection methods can be the S-video output, it needs a special wire. From the name it can be seen that this channel is designed to transmit only a video signal, for sound transmission, additionally use the "bells" by connecting the corresponding connectors on the TV and DVD. Another rare connection method is to connect with a composite output. This is the same connection with “bells”, there are only five connectors, three (green, blue, red) are used to transmit a video signal, the audio signal is also transmitted through two channels.

4. SCART-3RCA wire

But it may happen that the DVD and the TV do not have the same connectors, in which case you will have to use a wire adapter. They combine various combinations of connectors: SCART-3RCA, SCART-6RCA, SCART-S-video + 2RCA. These adapters allow the possibility of connecting both in one and in the opposite direction: SCART - to the TV or SCART - to the DVD.

When connecting, turn off the power to the TV and DVD, and do not plug into the network until you install the player in a permanent place.

Read the instructions on how to make the necessary settings in the TV Menu.

Copy the contents of the dvd disk to a USB flash drive and run the video ts folder. There are other ways, for example, to connect the telly and the computer to the local network, to share the drive on the computer and start directly from the telly over the network.

button on the remote control in the upper right corner, opposite to off. there you choose which plug to turn on!