RREEAALLTTEEKK Realtek alc898 driver download, High Definition Audio codec 7.1 Realtek ALC898
does not see the microphone jack on the front panel.
Driver version 6.0.1.7071
The problem is that when I insert the microphone into the corresponding connector on the front panel, the Realtek manager does not see that I inserted the microphone and therefore does not turn it on, the adjacent headphone jack works fine next to it and when I plug in the headphones it sees and turns them off speakers (as I configured) that are inserted into the rear panel. P.S. A huge request is not to advise putting a tick in the settings for "Disable front panel socket detection" because in this mode the automation is cut off, the microphone becomes visible in the system and when I insert the microphone into the connector it fully works with all the functions of Realtek. BUT, this disables the automatic detection of enabled devices and, as a result, disconnecting the rear connectors does not work. Contacts on the mat. board and wires checked several times Unsubscribe who knows the solution to this problem.
maybe the problem is not in the realtek drivers but in the micraphone itself !!! if the microphone works fine but it happens that they’re also attached to the computer’s assemblers, it’s possible they just connected poorly to me, so on the old computer the front panel didn’t work, removed the cover, and there it simply plugged in the sockets and wiring and it worked)))
Realtek HD Audio Drivers
Realtek alc898 driver download for Windows 7, Windows 10, High Definition Audio codec 7.1
https://www.realtek.com/en/products/computer-peripheral-ics/item/alc898
https://realtek-download.com/download-hd/
https://realtek-download.com/download-hd/
this means only one thing - that the connector is not connected to the motherboard
Comments
Post a Comment